Lathes

  • QuickviewAdd to compare

    Optimum Lathes Vario and conventional OPTIturn TU 2304V

    Description
    • Lathes for home improvement.
    • TU 2304V with electronically adjustable speed
    • Precise processing
    • Hardened and ground Z-axis guideway
    • Guaranteed concentricity of the spindle nose better than 0.009 mm
    • Concentricity - chuck better than 0.05 mm
    • Guaranteed concentricity of the spindle nose better than 0.009 mm
    • Concentricity - chuck better than 0.05 mm
    • Lead screw for thread cutting or automatic longitudinal turning
    • Right / left rotation in the control panel switchable
    • Rolled trapezoid spindles
    • Right-left rotation in the control panel switchable
    • Rolled trapezoid spindles
    • Emergency stop impact switch
    • Extensive accessories
    • Stable value
    • Powerful engine with a largely constant torque curve
    • Speed ​​change easily adjustable via potentiometer
    • Digital speed display
    • EMC filter class B (use in private households)
    • Room amenities:
    • Change gear kit
    • For thread cutting
    • Tapered roller bearings
    • Two pieces
    • P5 quality
    • lead screw
    • Stored in two sintered bearings
    • prism bed
    • Solid
    • cast iron
    • At least six months of storage
    • Induction hardened (HRC 42-52)
    • precision ground
    • sled
    • Precisely worked
    • Handwheels with adjustable fine scale 0.04 / 0.01 mm
    • Quadruple tool holder
    • All guides can be adjusted by wedge strips
    • tailstock
    • For taper turning ± 5 mm adjustable
    • Tailstock quill and handwheel with adjustable fine scale 0.02 mm
    • Fast, easy and tool-free adjustment by means of a clamping lever
    • thrust bearing
    1,690.00 BUY
  • QuickviewAdd to compare

    Optimum Lathes Vario and conventional OPTIturn TH 4010

    Description

      • Fully equipped guide and traction spindle lathes. TH 3309D with digital position indicator DPA 21, TH 3309V with brushless motor for stepless speed control and digital position indicator DPA 21.
      • Hardened and ground Z-axis guideway
      • Spindle mount Camlock DIN ISO 702-2 No. 4
      • Guaranteed concentricity of the spindle nose better than 0.015 mm
      • Motor protection switch (TH 3309 / TH 3309D)
      • DC 24 volt electrical system with two-channel safety circuit according to EN 23125
      • Lockable main switch
      • Right / left rotation on bed sled switchable
      • leading spindle
      • Machine base with tool compartment on the right side
      • Safety handwheels with release function in the X and Z axis
      • Emergency stop device with foot control

      TH 3309D / TH 3309V

      • Digital position indicator DPA 21
      • User-friendly membrane keypad, splash-proof, closed and glare-free
      • Significant reduction in production times
      • Higher work accuracy
      • Error rate is reduced
      • X, Z0, Z axis with 8-digit display each
      • Clearly arranged keyboard
      • glass scales

      TH 3309V: Powerful brushless drive

      • Especially quiet running
      • Approximately constant torque over the entire speed range
      • High power output

      switch cabinet

      • 24 volt DC power supply
      • All contactors and relays from Siemens or Schneider - TH 3309V from Eaton

      Room amenities:

      main spindle

      • Running in oil bath
      • Gear wheels smooth, hardened and ground

      sled

      • Precisely worked
      • Handwheels with adjustable fine scale 0.04 / 0.02 mm
      • Quadruple tool holder
      • All guides can be adjusted by wedge strips
      • Adjustment range upper slide ± 90 °

      prism bed

      • Heavily ribbed
      • Induction hardened
      • precision ground

      tailstock

      • For taper turning ± 10 mm adjustable
      • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

      LED machine light

      • Integrated in chip protection

      substructure

      • No toolboxes on the left, only panels

      tool compartment

      Right-left switch

      • two channels
      • tested according to EN 23125

      hand wheels

      • decoupled
      • tested according to EN 23125

      switch

      • with life cycle calculation
      • tested according to EN ISO 13849

      chip pan

      • extractable
      • guide rails

      Lathe chuck protection

      • tested according to EN 23125
    Call for Price BUY
  • QuickviewAdd to compare

    Optimum Lathes Vario and conventional OPTIturn TH 3309V

    Description

      • Fully equipped guide and traction spindle lathes. TH 3309D with digital position indicator DPA 21, TH 3309V with brushless motor for stepless speed control and digital position indicator DPA 21.
      • Hardened and ground Z-axis guideway
      • Spindle mount Camlock DIN ISO 702-2 No. 4
      • Guaranteed concentricity of the spindle nose better than 0.015 mm
      • Motor protection switch (TH 3309 / TH 3309D)
      • DC 24 volt electrical system with two-channel safety circuit according to EN 23125
      • Lockable main switch
      • Right / left rotation on bed sled switchable
      • leading spindle
      • Machine base with tool compartment on the right side
      • Safety handwheels with release function in the X and Z axis
      • Emergency stop device with foot control

      TH 3309D / TH 3309V

      • Digital position indicator DPA 21
      • User-friendly membrane keypad, splash-proof, closed and glare-free
      • Significant reduction in production times
      • Higher work accuracy
      • Error rate is reduced
      • X, Z0, Z axis with 8-digit display each
      • Clearly arranged keyboard
      • glass scales

      TH 3309V: Powerful brushless drive

      • Especially quiet running
      • Approximately constant torque over the entire speed range
      • High power output

      switch cabinet

      • 24 volt DC power supply
      • All contactors and relays from Siemens or Schneider - TH 3309V from Eaton

      Room amenities:

      main spindle

      • Running in oil bath
      • Gear wheels smooth, hardened and ground

      sled

      • Precisely worked
      • Handwheels with adjustable fine scale 0.04 / 0.02 mm
      • Quadruple tool holder
      • All guides can be adjusted by wedge strips
      • Adjustment range upper slide ± 90 °

      prism bed

      • Heavily ribbed
      • Induction hardened
      • precision ground

      tailstock

      • For taper turning ± 10 mm adjustable
      • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

      LED machine light

      • Integrated in chip protection

      substructure

      • No toolboxes on the left, only panels

      tool compartment

      Right-left switch

      • two channels
      • tested according to EN 23125

      hand wheels

      • decoupled
      • tested according to EN 23125

      switch

      • with life cycle calculation
      • tested according to EN ISO 13849

      chip pan

      • extractable
      • guide rails

      Lathe chuck protection

      • tested according to EN 23125
    Call for Price BUY
  • QuickviewAdd to compare

    Optimum Lathes Vario and conventional TQ 3209

    Description

    • Fully equipped leading and traction spindle lathes with feed gear running in oil bath. TQ 3209D with digital position indicator DPA 2000
    • Hardened and ground bed guideways
    • Spindle mount Camlock DIN ISO 702-2 No. 4
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Electrics with Siemens components
    • Emergency stop blow switch, motor protection switch, lockable main switch
    • Right-left rotation on bed carriage via switching spindle switchable
    • leading spindle
    • Machine base with tool compartment

    TQ 3209D:

    • Digital position indicator DPA 2000
      • Significant reduction in production times
      • Higher work accuracy
      • Error rate is reduced
      • Clearly arranged keyboard
      • glass scales

    Room amenities:

    • main spindle
      • Hardened and sanded
      • Running in oil bath
      • Mounted in 2 adjustable precision tapered roller bearings
      • Main spindle gears smooth, hardened and ground
    • Fast acting feed gear
      • Closed construction
    • Quality Chucks
      • Precise
      • Higher speed possible
      • High concentricity and repeat tension accuracy
    • sled
      • Precisely worked
      • Handwheels with adjustable fine scale 0.04 / 0.02 mm
      • Quadruple tool holder
      • All guides can be adjusted by wedge strips
      • Chip protection on the upper slide
      • Adjustment range upper slide ± 90 °
    • Halogen machine lamp
      • Covered articulated arm
      • High position stability
    • prism bed
      • Heavily ribbed
      • Induction hardened
      • precision ground
    • tailstock
      • For taper turning +/- 10 mm adjustable
      • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm
    3,849.00 BUY