Optimum Lathes Vario and conventional OPTIturn TH 4010

Description

    • Fully equipped guide and traction spindle lathes. TH 3309D with digital position indicator DPA 21, TH 3309V with brushless motor for stepless speed control and digital position indicator DPA 21.
    • Hardened and ground Z-axis guideway
    • Spindle mount Camlock DIN ISO 702-2 No. 4
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Motor protection switch (TH 3309 / TH 3309D)
    • DC 24 volt electrical system with two-channel safety circuit according to EN 23125
    • Lockable main switch
    • Right / left rotation on bed sled switchable
    • leading spindle
    • Machine base with tool compartment on the right side
    • Safety handwheels with release function in the X and Z axis
    • Emergency stop device with foot control

    TH 3309D / TH 3309V

    • Digital position indicator DPA 21
    • User-friendly membrane keypad, splash-proof, closed and glare-free
    • Significant reduction in production times
    • Higher work accuracy
    • Error rate is reduced
    • X, Z0, Z axis with 8-digit display each
    • Clearly arranged keyboard
    • glass scales

    TH 3309V: Powerful brushless drive

    • Especially quiet running
    • Approximately constant torque over the entire speed range
    • High power output

    switch cabinet

    • 24 volt DC power supply
    • All contactors and relays from Siemens or Schneider – TH 3309V from Eaton

    Room amenities:

    main spindle

    • Running in oil bath
    • Gear wheels smooth, hardened and ground

    sled

    • Precisely worked
    • Handwheels with adjustable fine scale 0.04 / 0.02 mm
    • Quadruple tool holder
    • All guides can be adjusted by wedge strips
    • Adjustment range upper slide ± 90 °

    prism bed

    • Heavily ribbed
    • Induction hardened
    • precision ground

    tailstock

    • For taper turning ± 10 mm adjustable
    • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

    LED machine light

    • Integrated in chip protection

    substructure

    • No toolboxes on the left, only panels

    tool compartment

    Right-left switch

    • two channels
    • tested according to EN 23125

    hand wheels

    • decoupled
    • tested according to EN 23125

    switch

    • with life cycle calculation
    • tested according to EN ISO 13849

    chip pan

    • extractable
    • guide rails

    Lathe chuck protection

    • tested according to EN 23125

Compare
Category:

Description

Technical Specifications

length 1,920 mm
Width depth 740 mm
height 1,222 mm
mass 775 kg
Power drive motor 1.5 kW
Electrical voltage 400V
Phase (s) 3 Ph
Current Type ~
power frequency 50 Hz
Spindle taper Camlock DIN ISO 702-2 No. 5
Spindle bore / rod diameter
Center height 205 mm
distance between centers 1,000 mm
Circumferential diameter over machine bed 410 mm
Circumference diameter in the bed bridge 540 mm
Turning length in the bed bridge 165 mm
bed width 206 mm
Speed ​​range 45 – 1,800 min-1
Number of speed ranges 16 steps
Travel X-axis 100 mm
Travel Y-axis 195 mm
Tailstock MK 3
Tailstock quill stroke 130 mm
Tailstock pinole diameter
spindle taper MK 6
Steel holder pick-up height max. 16 mm
Feed area along 0.043 – 0.653 mm / rev
Number of feeds along 48
Feed area flat 0.015-0.206 mm / rev
Number of feeds plan 48
Gradient Metric 0,4 – 7 mm / rev
Number of slopes Metric 42
Gradient inches 70 – 4 g / in
Number of slopes inches 42