Optimum Milling machine OPTImill BF 16Vario

939.00

Description

    • Small drilling-milling machine with electronically infinitely variable drive for the modeler
    • Versatile application
    • All guides are ground and visibly scraped (oil pockets for lubrication)
    • Column laterally displaceable for extended application
    • Tool holder MK2
    • Safety electronics in 24 Volt version
    • EMC filter class B (use in private households)
    • All travel paths are readable via scales
    • Inexpensive and stable in value

    Room amenities

    operating unit

    • Easy
    • clear
    • On-off switch
    • potentiometer
    • Emergency stop impact switch

    Speed ​​setting

    • Infinitely variable from 100 to 3,000 1 / min

    High concentricity

    • By tapered roller bearing
    • measured better than 0.015 mm in the quill

    windscreen

    • adjustable height
    • Large dimensions
    • microswitch

    cross table

    • Solid
    • T-grooves
    • Coolant groove
    • Adjustable end stops

    feed screw

    • Game in the feed spindle adjustable and adjustable

    gear ratio

    • Two-stage

    Drill-mill head

    • Can be tilted by ± 90 ° on both sides
    • for drilling and milling work in angular position as required

    guides

    • Clean milling pattern by individually clamped guides

    pillar

    • Stable
    • dovetail guide
    • Can be adjusted via wedge strips on all 3 axes

    hand wheels

    • Accurate delivery through positionable scale rings on all handwheels

    Longitudinal dimension scale

    • Integrated in the cross table

    Universal substructure

    • Dimensions L x W x H: 420 x 340 x 800 mm
      Art. 3353000

    chip pan

    • Dimensions L x W x H: 720 x 470 x 30 mm
      Art. 3352999

    Vibration damper machine foot SE 1 (4 pieces are required)

    • Item No. 3381012

    Digital position indicator DRO 5

    • Item No. 3383975

    Factory assembly DRO 5

    • Item No. 9000420
Add to compare
Sold By:  Millennium Machinery Athlone | Bandsaws Ireland| Drilling Machines Ireland
Categories: , Tag:

Description

Technical Specifications

Electrical voltage 230V
Phase (s) 1 Ph
Current Type ~
power frequency 50 h
Power drive motor 500W
Drilling capacity steel (S235JR) 16 mm
Continuous drilling capacity steel (S235JR) 12 mm
Knife head size max. 63 mm
End mill size max. 20 mm
Quill 50 mm
Spindle taper MK2 / M10
Throat 170 mm
Spindle speed 100 – 3,000 min-1
gear stages 2 steps / speed electronically adjustable
Vertical spindle Turning area milling head Z – X plane +/- 90 degrees
Cross table (length x width) 400 x 120 mm
T-slot 10 mm
T-slots number 3
T-slots clearance 35 mm
Spindle cross table distance 275 mm
Travel X-axis 220 mm
Travel Y-axis 160 mm
Traverse Z-axis 210 mm
Dimensions (length x width x height) 505 x 465 x 795 mm
mass 62 kg