Heavy-duty master and spindle lathes, which are characterized by high flexibility, precision, and cost-effectiveness. With 3 Axis DRO and quick-change tool post

Hardened and ground Z-axis guideway
Spindle mount Camlock DIN ISO 702-2 No. 8
Precisely crafted sled
Handwheels with adjustable fine-scale 0.04 / 0.02 mm
All guides can be adjusted by wedge strips
Waves and wheels running in oil bath
Adjustment range upper slide ± 90 °
Guaranteed concentricity of the spindle nose better than 0.015 mm
The main spindle running in oil bath
Gear wheels smooth, hardened, and ground with 2 adjustable precision tapered roller bearings
Clear selection lever for switching the feed rates
The closed design of the rapid-action feed gear
Gears and shafts hardened and ground in an oil bath in precision bearings
Handwheels decoupled and tested according to EN 23125
Two-channel right-left switch tested to EN 23125
Switch with life cycle calculation, tested according to EN ISO 13849
Right / left rotation on bed carriage via switching spindle switchable
Central lubrication in the bed slide
Leading spindle
Emergency stop blow switch, motor protection switch, lockable main switch
Emergency stop device with foot control
Safety handwheels with release function in the X and Z axis
Tailstock for taper turning ± 10 mm adjustable
Tailstock quill and hand wheel with adjustable fine-scale 0.025 mm
Fast, easy, and tool-free adjustment by means of a clamping lever
Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
Coolant devise with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
LED machine lamp in chip protection
Electrics with Siemens components
Energy chain for gentle line and hose routing
The adjustable scale of the threaded clock
Quick change tool post SWH 7-C
1 steel holder 32 x 150 type D for square chisel 25 mm

Connection	400 V / 3 Ph ~50 Hz
Total connected load	8.5 kW
Power of the coolant pump	125w
Driving motor spindle	7.5 kW
Spindle taper	MT 7
Spindle seat	Camlock DIN ISO 702-2 Nr. 8
Spindle hole, rod passage	80mm
Quadruple tool holder seat height	25 x 25 mm
Centre height	280 mm
Centre width	1,420 mm
Turning Ø over lathe bed	560 mm
Turning Ø over cross slide	355 mm
Turning Ø in the bed bridge	790 mm
Length of bed bridge	170 mm
Bed width	350 mm
Spindle speed	25 – 1,600 min-1
Number of steps	12 steps
Travel top slide	130 mm
Travel cross slide	316 mm
Longitudinal feed in the range of	0.059 – 1.646 mm/U; 35 feeds
Transverse feeds in the range of	0.020 – 0.573 mm/U; 35 feeds
Pitch – Metric in the range of	0.2 – 14 mm/U; 47 thread pitches
Pitch – Inch in the range of	112 – 2 Gg/in.; 60 thread pitches
Diametral pitch in the range of	4 – 112; 50 trapezoid thread
Modular threads in the range of	0.1 – 7; 34 modular thread
Tailstock seat	MT 5
Tailstock- sleeve diameter	75mm
Tailstock- sleeve travel	180 mm
Dimensions (Length x Width x Height)	2,950 x 1,150 x 1,650 mm
Net weight	2,300 kg

DELIVERY CONTENTS

Three Jaw chuck 315mm
3 Axis DRO
Coolant System
Fixed Steady passage max. Ø 165 mm
Running Steady passage max. Ø 95 mm
LED machine light
Reduction sleeve MT 7 / MT 5
Fixed centre point MT 5
Live Centre MT 5
Quick change tool post SWH 7-C
1x Steel holder 32 x 150 type D for square chisels
Threading gauge
Change gear set
Initial machine filling with quality oil
User Manual

Precision Centre Lathe - OPTIturn TH 5615D

Description