Fully equipped guide and traction spindle lathes.
Hardened and ground Z-axis guideway
Spindle mount Camlock DIN ISO 702-2 No. 4
Guaranteed concentricity of the spindle nose better than 0.015 mm
Motor protection switch (TH 3309 / TH 3309D)
DC 24 volt electrical system with two-channel safety circuit according to EN 23125
Lockable main switch
Right / left rotation on bed sled switchable
leading spindle
Machine base with tool compartment on the right side
Safety handwheels with release function in the X and Z axis
Emergency stop device with foot control
DRO in photo is an Optional add on

Switch cabinet

Room amenities:

Main spindle

Carriage

Bed

Tailstock

LED machine light

Substructure

tool compartment

Right-left switch

Handwheels

Switch

Chip pan

Lathe chuck protection

length	1,685 mm
Width depth	745 mm
height	1,320 mm
mass	430 kg
Power drive motor	1.5 kW
Electrical voltage	400V
Phase (s)	3 Ph
Current Type	~
power frequency	50 Hz
Spindle taper	Camlock DIN ISO 702-2 No. 4
Spindle bore/rod diameter	38mm
Centre height	165 mm
distance between centres	830 mm
Circumferential diameter over machine bed	330 mm
Circumference diameter in the bed bridge	170 mm
Circumferential diameter over cross slide	196 mm
Turning length in the bed bridge	196 mm
Speed range	70 – 2,000 min-1
Number of speed ranges	16 steps
Travel X-axis	98 mm
Travel Y-axis	164 mm
Tailstock	MK 3
Tailstock quill stroke	110 mm
Tailstock pinole diameter	32 mm
spindle taper	MK 5
Steel holder pick-up height max.	16 mm
Feed area along	0,052 – 1,392 mm / rev
Number of feeds along	32
Feed area flat	0.014 – 0.38 mm / rev
Number of feeds plan	32
Gradient Metric	0.4 – 7 mm
Number of slopes Metric	26
Gradient inches	56 – 4 g / in
Number of slopes inches	34

DELIVERY CONTENTS

Centre Lathe - OPTIturn TH 3309 (400v)