My Cart

Close

Centre Lathe - OPTIturn TH 3309 (400v)

Description

  • Fully equipped guide and traction spindle lathes. 
  • Hardened and ground Z-axis guideway
  • Spindle mount Camlock DIN ISO 702-2 No. 4
  • Guaranteed concentricity of the spindle nose better than 0.015 mm
  • Motor protection switch (TH 3309 / TH 3309D)
  • DC 24 volt electrical system with two-channel safety circuit according to EN 23125
  • Lockable main switch
  • Right / left rotation on bed sled switchable
  • leading spindle
  • Machine base with tool compartment on the right side
  • Safety handwheels with release function in the X and Z axis
  • Emergency stop device with foot control
  • DRO in photo is an Optional add on

    Switch cabinet

    • 24 volt DC power supply
    • All contractors and relays from Siemens or Schneider 

    Room amenities:

    Main spindle

    • Running in oil bath
    • Gear wheels smooth, hardened and ground

    Carriage

    • Precisely worked
    • Handwheels with adjustable fine-scale 0.04 / 0.02 mm
    • Quadruple tool holder
    • All guides can be adjusted by wedge strips
    • Adjustment range upper slide ± 90 °

    Bed

    • Heavily ribbed
    • Induction hardened
    • precision ground

    Tailstock

    • For taper turning ± 10 mm adjustable
    • Tailstock sleeve and hand wheel with adjustable fine-scale 0.025 mm

    LED machine light

    • Integrated in chip protection

    Substructure

    • No toolboxes on the left, only panels

    tool compartment

    Right-left switch

    • two channels
    • tested according to EN 23125

    Handwheels

    • decoupled
    • tested according to EN 23125

    Switch

    • with life cycle calculation
    • tested according to EN ISO 13849

    Chip pan

    • extractable
    • guide rails

    Lathe chuck protection

    • tested according to EN 23125

    Technical Specifications

    length 1,685 mm
    Width depth 745 mm
    height 1,320 mm
    mass 430 kg
    Power drive motor 1.5 kW
    Electrical voltage 400V
    Phase (s) 3 Ph
    Current Type ~
    power frequency 50 Hz
    Spindle taper Camlock DIN ISO 702-2 No. 4
    Spindle bore/rod diameter 38mm
    Centre height 165 mm
    distance between centres 830 mm
    Circumferential diameter over machine bed 330 mm
    Circumference diameter in the bed bridge 170 mm
    Circumferential diameter over cross slide 196 mm
    Turning length in the bed bridge 196 mm
    Speed range 70 – 2,000 min-1
    Number of speed ranges 16 steps
    Travel X-axis 98 mm
    Travel Y-axis 164 mm
    Tailstock MK 3
    Tailstock quill stroke 110 mm
    Tailstock pinole diameter 32 mm
    spindle taper MK 5
    Steel holder pick-up height max. 16 mm
    Feed area along 0,052 – 1,392 mm / rev
    Number of feeds along 32
    Feed area flat 0.014 – 0.38 mm / rev
    Number of feeds plan 32
    Gradient Metric 0.4 – 7 mm
    Number of slopes Metric 26
    Gradient inches 56 – 4 g / in
    Number of slopes inches 34

     

    DELIVERY CONTENTS
    • Three Jaw Chuck (200mm)
    • Steady rest passageway Ø 6 - 50 mm
    • Follow rest passageway Ø 8 - 30 mm
    • LED machine lamp
    • Reduction sleeve MT 5 - MT 3
    • Two fixed centres MT 3
    • Quadruplicate tool holder 16 mm
    • Replaceable gear set
    • Machine chassis
    • Machine initially filled with premium grade oil
    • DRO in photo is an Optional add on.
    €8.950,00 incl. Vat
    3402030
    Quantity
    - +

    Email me when this is available