65 Tonne Ironworker - HPS 65 Dual Station
Description
- Combined hydro. Section steel shears/punching with up to 5 processing stations and foot control
- Punching station, flat steel shears, angle steel shears, sectional steel shears, from HPS 45S with notching station
- DS series with two working cylinders and two-foot pedals for simultaneous use with punching station and sectional steel shears
- Stepless adjustment of the stroke
- larger reach for punching station with 620mm optional, available from HPS 55DS
- heavy and stable welded construction
- from HPS 45S as standard with notching knife
- With a powerful 400Volt engine
- V-notching knife, oversized punching device, and larger punching station punching available on request
- Two-stage foot pedal for inching operation
- Standard with MUBEA-holder for stamp no. 1, no. 2, and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional
Advantages of punching over drilling:
- high time savings – cycle times
- no chips
- no cooling
Note:
- All hydraulic sectional shears are delivered with oil.
Technical Specifications
| Ø in max. Sheet thickness ** | |
| Throat | 305 mm |
| stroke | 55 mm |
| Stroke/min. | 25 |
| Working height punch | 1030 mm |
| Steel bar shears Round/square | 45mm / 45mm |
| 90 ° cut in mm | 120 x 120 x 12 mm |
| 45 ° cut in mm | 70 x 10 mm |
| working height | 1140 mm |
| Material thickness max. | 300 x 20 mm |
| Material size max. | 375 x 15 mm |
| knife length | 380 mm |
| angle cut | 100 x 15 mm |
| working height | 900 mm |
| Material thickness max. | 10 mm |
| width | 45 mm |
| depth | 90 mm |
| UI profile knife | 120 x 58 mm |
| T-profile knives | 90 x 11 mm |
| Special V-notching tools | 100 x 100 x 13 mm |
| Motor power 50 Hz | 5.5 kW |
| Net Weight | 1600 kg |
| pressure | 75 to. |
| Dimensions in mm | 1700 x 950 x 1880 |