MTBS 2100-40 T
Description
Motorized sheet metal shears with NC-controlled back gauge
- Thin sheets are supported in order to be able to apply dimensionally to the back gauge
- the pneumatic sheet holding device with selector lever for the direction of the sheet metal chute
- The operator can choose if the section falls into the backroom or the operator side
- Powerful drive via gearbox-supported motor and massive chain
- Backs can be guided on round shafts 750 mm driven by ball screws
- Positioning control of back gauge Mapper HT071 with digital dimension display
- heavy and robust steel construction in welded construction
- constant, low cutting angle for optimum cutting results
- Control panel on the left side of the machine Side stop 1.000 mm with scale and T-slot
- 2 material support arms 500 mm with T-slot
- Balls in the support table for easier material transport
- Cutting gap adjustment with a ratchet wrench and vernier ring
- high-quality knife (also suitable for stainless steel)
- Cutting edge LED lighting with silhouette
- Rear room safety with side plates and light barrier
- continuous finger protection device
- mobile foot pedal with EMERGENCY STOP switch
- All moving parts are stored with low maintenance
- Electrics from “Siemens” and “Schneider”
Optional accessories:
- Extension of the back gauge from 750 mm to 1,000 mm
- Miter fence Adjustable, removable miter fence for angles from 0 ° -180 °
- Manual central lubrication
-
Mobile sheet metal tray: Mobile tray for the rear space of the machine. Maximum load 300 kg
Technical specifications
| Length (product) approx. | 2880 mm |
| Width / depth (product) approx. | 2360 mm |
| Height (product) approx. | 1280 mm |
| Weight (net) approx. | 2650 kg |
| Recording power drive motor | 8.45 kW |
| Output power drive motor | 7.5 kW |
| Total connection value | 9 kW |
| Total current consumption | 16.4 A |
| Nominal mode drive motor | S1 |
| Duty cycle drive motor | 100% |
| Electrical voltage | 400V |
| Phase (s) | 3 |
| Current Type | ~ |
| power frequency | 50 Hz |
| Cutting length max. | 2100 mm |
| Cutting performance at material tensile strength 400 N / mm² | 4 mm |
| Cutting performance at material tensile strength 450 N / mm² | 4 mm |
| Cutting performance at material tensile strength 700 N / mm² | 2.5 mm |
| cutting speed | 120 m / min |
| Backgauge adjustment range up to | 750 mm |
| Backgauge speed | 28 mm / s |
| Engine power backgauge | 0.37 kW |
| Side stop length | 1000 mm |
| cutting angle | |
| Strokes max. at full cutting length | 38 1 / min |
| Sheet metal low number | 3 |
| Cutting gap adjustment min. | 0.05 mm |
| Cutting gap adjustment max. | 0.4 mm |
| Table length | 2278 mm |
| Table depth | 530 mm |
| Table height | 860 mm |
| Deep machine body | 870 mm |