Centre Lathe - OPTIturn TH 4010D (400v)
Description
- Fully equipped mechanic lathes. Convincing in precision and performance. TH 4010D with Digital Readout System
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 5
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Gears and shafts hardened and ground,
running in an oil bath in precision bearings
- Motor protection switch (TH 4010 / TH 4010D)
- DC 24 Volt – electrics
- Lockable main switch
- Right / left rotation on bed sled switchable
- Safety handwheels with release function in the X and Z axis
- Emergency stop device with foot control
TH 4010D
- Digital Readout System DPA21
- User-friendly membrane keypad, splash-proof, closed and glare-free
- Higher work accuracy
- The error rate is reduced
- X, Z0, Z-axis with 8-digit display each
- glass scales
Room amenities:
Switch cabinet
- 24 volt DC power supply
- All contractors and relays from Siemens or Schneider – TH 4010V from Eaton
Main spindle
- Running in oil bath
- Gear wheels smooth hardened and ground
Carriage
- Precisely worked
- Handwheels with adjustable fine-scale 0.04 / 0.02 mm
- All guides can be adjusted by wedge strips
- Adjustment range upper slide ± 90 °
LED machine light
- integrated into the chip protection
Coolant system
Bed
- Heavily ribbed
- cast iron
- Induction hardened and precision ground
Tailstock
- For taper turning ± 10 mm adjustable
- Tailstock sleeve and hand wheel with adjustable fine-scale 0.025 mm
Substructure
- Without tool trays, only screens
Chip pan
Length (product) |
1,920 mm |
Width / depth (product) |
740 mm |
Height (product) |
1,555 mm |
Weight (net) |
775 kg |
Power drive motor |
2.4 kW |
Electrical voltage |
400V |
Phase (s) |
3 Ph |
Current Type |
~ |
power frequency |
50 Hz |
Spindle taper |
Camlock DIN ISO 702-2 No. 5 |
Spindle bore/rod diameter |
52mm |
Centre height |
205 mm |
distance between centres |
1,000 mm |
Circumferential diameter over machine bed |
410 mm |
Circumference diameter in the bed bridge |
540 mm |
Turning length in the bed bridge |
165 mm |
bed width |
206 mm |
Speed range |
45 – 1,800 min-1 |
Number of speed ranges |
16 steps |
Travel X-axis |
100 mm |
Travel Y-axis |
195 mm |
Tailstock |
MT 3 |
Tailstock quill stroke |
130 mm |
Tailstock quill diameter |
45mm |
spindle taper |
MT 6 |
Steel holder pick-up height max. |
16 mm |
Feed area along |
0.043 – 0.653 mm / rev |
Number of feeds along |
48 |
Feed area flat |
0.015 – 0.206 mm / rev |
Number of feeds plan |
48 |
Gradient Metric |
0.4 – 7 mm / rev |
Number of slopes Metric |
42 |
Gradient inches |
70 – 4 Gg / in. |
Number of slopes inches |
42 |
- Three Jaw Chuck (200mm)
- Fixed Steady passage Ø 5 - 85 mm
- Running Steady passage Ø 5 - 65 mm
- LED machine light
- Reduction sleeve MT 6 / MT 3
- Fixed centering points MT 3
- Fixed centering point MT 3, alloyed
- Change gear set
- Initial machine filling with quality oil
- Quadruple steel holder 16 mm