Unicraft

• Minimum solvent capacity 36 l
• Speed of circulation 3.3 l/min
• Absorbed motor power 0.026 kW
• Cabine capacity 80 l
• Max. weight on support grille 20 kg

Unicraft

• Max. height 1850 mm
• Min. height 1500 mm
• Drain hose diameter 19 mm
• Drain hose length 1.9 m
• Net weight 31.5 kg

Unicraft

• Max. height 1900 mm
• Min. height 1400 mm
• Drain hose diameter 25 mm
• Drain hose length 1.9 m
• Net weight 23 kg

Unicraft

• Minimum solvent capacity 8 – 14 l
• Approx. compressed air requirement 140 l/min
• Speed of circulation 0.8 l/min
• Absorbed motor power 1.25 kW
• Cabine capacity 140 l

Unicraft

• Minimum solvent capacity 72 l
• Speed of circulation 3.3 l/min
• Absorbed motor power 0.026 kW
• Cabine capacity 150 l
• Max. weight on support grille 40 kg

Unicraft

• Minimum solvent capacity 10.5 l
• Speed of circulation 3.3 l/min
• Absorbed motor power 0.026 kW
• Cabine capacity 20 l
• Max. weight on support grille 10 kg

Unicraft

• Minimum solvent capacity 4 – 9 l
• Approx. compressed air requirement 140 l/min
• Speed of circulation 0.8 l/min
• Absorbed motor power 0.04 kW
• Cabine capacity 140 l

Unicraft

• Extraction performance 36 m³/h
• Abrasive grain size recommended 0.2 - 0.3 mm
• Cabin interior height 825 mm
• Net weight 215 kg
• Cabin interior length 1300 mm

Unicraft

• Extraction performance 18 m³/h
• Air requirement average, 400 – 800 l/min
• Abrasive grain size recommended 0.2 – 0.3 mm
• Cabin interior height 850 mm
• Net weight 160 kg

Unicraft

• Extraction performance 18 m³/h
• Air requirement average, 300 l/min
• Abrasive grain size recommended 0.2 – 0.3 mm
• Cabin interior height 580 mm
• Net weight 124 kg

Unicraft

• Extraction performance 2.5 m³/h
• Air requirement average, 200 – 350 l/min
• Abrasive grain size recommended 0.2 – 0.3 mm
• Cabin interior height 605 mm
• Net weight 90 kg

Unicraft

• Max. abrasive grain size 0.125 – 0.45 mm
• Air requirement average, 200 – 350 l/min
• Abrasive grain size recommended 0.2 – 0.3 mm
• Cabin interior height 360 mm
• Net weight 48 kg

Unicraft

• Max. abrasive grain size 0.125 – 0.45 mm
• Air requirement average, 196 l/min
• Abrasive grain size recommended 0.2 – 0.3 mm
• Cabin interior height 200 mm
• Net weight 12,5 kg

Unicraft

• Max. abrasive grain size 0.125 – 0.45 mm
• Air requirement average, 200 – 350 l/min
• Abrasive grain size recommended 0.2 – 0.3 mm
• Cabin interior height 300 mm
• Net weight 17.25 kg

Unicraft

• Max. abrasive grain size 0.15 - 0.45 mm
• Air requirement average, 420 l/min
• Abrasive grain size recommended 0.18 - 0.25 mm
• Height 1040 mm
• Net weight 27 kg

Unicraft

• Air requirement average, 200 – 350 l/min
• Container volume 0.9 l
• Height 250 mm
• Net weight 0,85 kg
• Length 330 mm

Unicraft

• Cylinder stroke 130 mm
• Net weight 31.5 kg
• Pressure force 10 t

Unicraft

• Net weight 96 kg
• Cable length 5 m
• Coolant volume 17.5 l
• Degree of protection IP 21
• Frequency 50 Hz

Unicraft

• For heating before hardening, straightening, bending or forging of tubes, round steel and profiles
• Local heating of parts for soldering, pressing, bending and bonding
• Integrated water coolinghlung
• Cost-effective, safe and clean alternative to heating with a burner
• Infinitely variable output control from 10 to 100 percent

Unicraft

• Net weight 13.5 kg
• Coolant volume 2.5 l
• Degree of protection IP22
• Frequency 50 Hz
• Fuse protection 16 A

Unicraft

• Net weight 5 kg
• Degree of protection IP 21
• Frequency 50/60 Hz
• Fuse protection 16 A
• Height 140 mm

Unicraft

• Illuminant output 1 kW
• Colour temperature 2500 K
• Drying area length 800 mm
• Net weight 19.5 kg
• Degree of protection IP21

Unicraft

• Illuminant output 3.3 kW
• Colour temperature 2500 K
• Drying area length 1200 mm
• Net weight 45 kg
• Degree of protection IP21