Skip to Main Content
View Product
Sort + Filter
Show
-
Metalworking
- Metal band saws
- Drilling machines
- Milling machines conventional
- Lathes conventional
- Newall DRO
-
Metal circular saws
- Alloy circular saws automatically
- Alloy circular saws manually
- Metal circular saw / dry cutter
- Metal circular saws manually
- Semi-automatic metal circular saws
- Sliding table saws
- Underfloor alloy circular saw
- Vertical metal circular saws automatically
- Vertical metal circular saws manually
- Vertical metal circular saws semi-automatic
- Roller conveyors, material stands and accessories
-
Grinding and polishing machines for metal
- Belt and disc sanders
- Belt grinding machines
- Bench grinders
- Brush deburring machine
- Burnishing
- Combination grinding machine
- Cylindrical grinding machines
- Drill grinding machines
- Graver and tool grinding machines
- Polishing machines
- Surface grinders
- Universal grinding machines with grinding attachment
- Shears
- Benders
-
Press
- Arbor presses
- Fully hydraulic tire press, motorized
- Fully hydraulic workshop presses, motorized
- Hydraulic C-frame presses, motorized
- Hydraulic frame presses, motorized
- Hydraulic straightening press, motorized
- Hydraulic workshop presses, hand-operated
- Hydraulic workshop presses, motorized
- Toggle press
- Notching, punching and grooving machines
- Edge deburring machines
- CNC lathes
- CNC milling machines
- CNC training packages
-
Accessories
- 3-jaw lathe chuck 300 mm instead of the standard lathe chuck
- 3D printing interface
- 4-axis complete set for OPTImill F80
- 4-jaw lathe chuck 250 mm
- 4-jaw lathe chuck 250 mm instead of the standard lathe chuck
- 5-axis rotary/swivel table
- Additional Finger Blocks (each one)
- Additional Sliding Arm standard (each one)
- Additional Sliding Arm with height adjustment by handwheel (each one)
- Additional backgauge finger (manual Z-axis-adjustment)
- Additional cost for height adjustment of front support arms by handwheel
- Additional front support arm (height adjustment without handwheel)
- Additional side stop right side of machine
- Additional support arm with vertical support HTBS BASIC S
- Adjustable angle stop
- Air conditioning
- Air conditioning for OPTImill FU 5
- Air conditioning for OPTIturn S 620 / S 620L
- Automatic adjustment of the cross feed
- Automatic balancing device for FSM 4080 PRO
- Automatic central lubrication
- Automatic central lubrication of the cutter bar guide
- Automatic door opener
- Automatic paper band filter with cooling system
- Automatic paper band filter with magnetic separator and cooling system
- Automatic parts catcher
- Automatic pole gripper Flux II
- Axis license for the 4th and 5th axis
- BLUM LC50 digiloc measuring probe
- BLUM TC52 Universal measuring probe
- BLUM TC52 touch probe
- BLUM TC52IR
- BLUM TC52IR - Probes + BLUM ZX-Speed - 3-D probe
- BLUM ZX-Speed
- Back gauge X/R with X-travel = 1.000mm
- Back gauge X/R/Z1/Z2 + Delta X
- Back gauge X/R/Z1/Z2 with X-traveling distance = 750 mm
- Back gauge X/X2/R1/R2/Z1/Z2
- Back stop range 1250 mm
- Backgauge system X/R/Z1/Z2 with X-stroke = 650mm
- Bar feeder Fedek
- Bar loader Pro V 65 E for OPTIturn L 44
- Bending machines accessories
- Block jaws
- Bundle clamping device to the left of the saw band - cannot be used for angle cuts in automatic mode
- Bundle clamping device to the right of the saw band - can only be used for angle cuts to the left
- C-axis brake system for OPTIturn L 440
- C-axis brake system for OPTIturn L 460
- CNC Control 2D DELEM DA-66T with Offline-Software DA-60TL
- CNC control Cybelec VisiTouch 19-2D
- CNC machines accessories
- CNC machines special equipment
- Central lubrication via hand pump
- Chip conveyor BMBS 230x280 CNC-G
- Chip conveyor HMBS 500 x 750 HA-DG / HMBS 500 x 750 HA-DG X
- Chip conveyor HMBS 600
- Chip conveyor HMBS HA CALIBER
- Chip conveyor for stainless steel chips including chip container HMBS 400 CNC
- Chip conveyor incl. chip container
- Collet Chuck - Hydraulic three-jaw chuck Ø 150 mm
- Collet Chuck - Hydraulic three-jaw chuck Ø 200 mm
- Collision Avoidance
- Collision Avoidance mit SINUMERIK
- Control Cybelec CybTouch 15
- Control Cybelec VisiTouch 19 MX-3D
- Control DELEM DA-69T-3D with Offline-Software DA-60TL
- Control FF101 with 3D graphics
- Control PT 1
- Control PUD
- Control Schneider NC1
- Control Schneider NC2
- Control and electric cabinet on opposite
- Conveyor
- Coolant Accessories
- Coolant equipment
- Couplings
- Cover, plate galvanized
- Cut channel wear plate
- Cut line display by laser
- Cut path monitoring
- Digital display feed roller
- Digital display setting dimension
- Digital read out of side roller for RBM E
- Digital read out of side roller for RBM E Pro
- Digital read out of side roller for RBM E Pro (with motorized delivery of the side roller)
- Displays
- Double arm gripper Tool changer
- Double contact spindle system BIG-PLUS BT 30
- Drilling and milling machines
- Drills
- Edge deburrer
- Electric contact stop
- Electric magnetic clamping plate fine pole
- Electronic brake for GZ grinding blocks incl. Attachment
- Engines and transmissions
- Equipment options
- Extension for standard support arms with vertical support
- Extension motor backgauge from 750 mm to 1000 mm
- Extension squaring arm with vertical support
- FIESSLER AKAS-3 P safety system, FMSC and communication module
- Fiber laser accessories
- Fine adjustment for crossfeed
- Fine adjustment for vertical feed
- Finger protection
- Finger protection, can be folded up to 1000 mm
- Fixed bezel for OPTIturn L 44
- Four-jaw lathe chuck for OPTIturn CNC
- Fourth axis complete set F 105 - 410 HSC
- Full encapsulation of the grinding area with two sliding doors for FSM PRO
- Full splash guard
- Full splash guard for FSM DT
- Grease lubrication
- Grinding and polishing machines for metal
- Grinding wheel flange
- Grinding wheel flange for FSM PRO
- Grinding wheel flange for automatic balancing device for FSM 4080 PRO
- Hardened rollers for stainless steel for RBM E Pro
- Hardened rollers for stainless steel for RBM E Pro (with motorized delivery of the side roller)
- Hardened rolls for stainless steel for RBM
- Hardened rolls for stainless steel for RBM E
- Hardened segments FSBM
- Hardened segments HSBM 2020-20 SB
- Hardened upper cheek HSBM 1020-10
- Hardening of standard tools
- Hardware divider (manual opening)
- Hardware divider (pneumatic opening)
- Heidenhain Encoder ERM 2480
- Heidenhain glass scales
- Hold-up device for thin sheet metal, pneumatic
- Hydraulic Bottom-Tool-Clamping WILA Pro
- Hydraulic Top-Tool-Clamping WILA Pro
- Hydraulic adjustment of the lateral guide rollers PRM 80 FH
- Hydraulic auxiliary crane
- Hydraulic band tensioning device
- Hydraulic four-jaw lathe chuck Ø 150 mm
- Hydraulic parallel puller
- Hydraulic side support
- Hydraulic tailstock quill for OPTIturn L 44
- Hydraulic three/four-jaw lathe chuck
- Increased motor power spindle FSM PRO
- Infinitely adjustable speed
- Infinitely variable bending speed
- Inline spindle 12000 min¹
- Internal spindle cooling CTS
- Internal spindle cooling CTS 70 bar external
- Internal spindle cooling CTS for OPTImill F 120X
- Internal spindle cooling CTS, external unit 70 bar
- Internal spindle cooling CTS, unit integrated 20 bar
- Jaws
- Laser measuring system BLUM LaserControl NT 3A
- Lathes accessories
- Light Curtains instead of finger protection
- Main spindle HSK63, 24,000 rpm
- Manual central lubrication
- Manual central lubrication of the cutter bar guide
- Maszyny do wycinania, wykrawania i rowkowania
- Material start sensor
- Material tension / feed
- Measuring systems
- Mess-System BLUM TC52
- Metal band saw (options / accessories)
- Metal circular saw accessories
- Micro spray system with switch at the machine
- Micro spray system with two spray heads and two pumps
- Milling machines
- Milling machines accessories
- Motor upgrade 3-D printing
- Motorised back roll of the pinch roller for RBM E Pro (with motorized delivery of the side roller)
- Motorised feed of the side roller for RBM E
- Motorised feed of the side roller for RBM E Pro
- NC control
- NC control PRM 100 FH
- NC control PRM 80 FH
- NC controlled parallel pulling and compensating device on the grinding head
- NC controlled parallel stripping and balancing device
- NCU1760 upgrade for FU 450
- Oil Heater
- Oil cooler
- Oil heater
- Oil mist extraction for FU 650
- Oil separator
- Other options
- Parking Area for support arms (1 meter)
- Parts catcher
- Permanent magnet clamping plate 250 x 500 mm
- Plate shears
- Pneumatic sheet support 1-stage up to 6 mm in the rear area
- Pneumatic sheet support 2-stage up to 6 mm in the rear area (complete tray)
- Portable electronic handwheel for OPTIturn L 44
- Power transformer for OPTIturn L 44
- PowerPack for hydraulic clampings
- Preparation Fourth axis rotary dividing table complete set
- Preparation for the fourth axis
- Preparation fourth axis round dividing table
- Presses
- Projection 620 mm for punching station
- Quick change tool holder Multifix 4 for OPTIturn L 44
- RENISHAW Primo set
- Rapid traverse vertically
- Rear splash guard
- Rear stop 6 - 760 mm, with hand wheel, measuring device and stop fingers
- Recirculating ball screw for crossfeed
- Renishaw NC4 Laser
- Renishaw OMP 60
- Renishaw OP60 Workpiece probe
- Renishaw OTS probe and Renishaw OMP40-2 probe
- Renishaw Primo set
- Renishaw TS27R tool probe
- Roller conveyor feet M16 x 250 mm, for height adjustment up to 1020 mm
- Roller conveyor feet M16 x 250 mm, for height adjustment up to 1020 mm (ex work)
- Roller conveyors, material stands and accessories
- Roller shears
- Rotoclear S3S / S3K mounting kit incl. assembly
- Running steady rest for OPTIturn L 44
- Safety equipment
- Safety light barrier behind the saw
- Safety light barrier in front of the saw
- Safety system FIESSLER, FMSC and communication module for tandem machine
- Second foot switch
- Servo motor back stop
- Sheet follower with sliding guide - motorised height adjustment
- Short bar feeder Pro Conqueror
- Short bar feeder Pro V65-E / Pro V 65LE
- Siemens control PPU 290
- Small parts flap for front ejection
- Software license S16 spline interpolation
- Software license S22 Readjustment
- Solenoid Ventil Set für Frästisch
- Spindelinnenkühlung CTS Grundfos
- Spindle bore
- Spindle bore 102 mm
- Spindle bore 102 mm Chuck opening Ø 90 mm Holder A 2-8
- Spindle bore 116 mm Chuck opening Ø 105 mm Holder A 2-8
- Spindle bore 62 mm Chuck opening Ø 51 mm Holder A 2-6
- Spindle internal cooling CTS aggregate integrated, 20 bar
- Spindle oil cooler
- Spindle-table distance
- Splash guard front and side
- Suction device with cooling system
- Suction units for metal belt sanders
- Surcharge for WILA Crowning with mechanical fine adjustment
- Surcharge for motor 5.5kW instead of 4.0kW
- Surcharge hydraulic top roller
- Swing bridge
- Teach-in NC control Easy-View
- Technical chemicals
- Three-jaw lathe chuck for OPTIturn CNC
- Tool changer
- Tool changer 30 tools
- Tool changer 60-fold upgrade for FU 650
- Tool changer FP 1840 / FP 2560
- Tool cooling
- Tool holder set for OPTIturn L 44
- Tool turret Baruffaldi TBMA160 VDI40
- Tool turret Baruffaldi TBMA160 VDI40 for OPTIturn L 460
- Transfer ball in the side stop and the front support arms
- Two bending speeds
- Upgrade spindle with servo drive (instead of inverter)
- Vario conversion with machine base GU 1 - 0.75 kW
- Vario conversion with machine base GU 1 - 1.5kW
- Vario conversion with machine base GU 3
- Vario conversion with machine base GZ
- Vario reconfiguration MZ
- Variou conversion with GU 3 - 1.5 kW machine base
- Viewing glass Rotoclear S3K
- Y-axis
- chip brushes
- hydraulic adjustment of the lateral guide rollers PRM 100 FH
- motor driven chip brush
- Extractors for metal belt grinders
- Laser engraver
- Measuring device
- Machinery lamps
- 3D printing
-
Workshop
- Power generators
- Battery charging and starting
- Heaters
- Air conditioners
- Fans and dehumidifiers
- Hoists
- Mounting aids
- Jack
- Transport aids
- Lift trucks
- Height-adjustable work tables
- Bodywork and workshop equipment
- Company equipment
-
Accessories
- Air conditioners accessories
- Air transport hoses
- Electric winches accessories
- Factory equipment accessories
- Fans and dehumidifiers accessories
- Heater accessories
- Height-adjustable work tables Accessories
- Induction heaters accessories
- Infrared paint dryer accessories
- Jack accessories
- Mounting aids accessories
- Pallet trucks accessories
- Parts washing equipment accessories
- Sandblasting accessories
- Solar panels
- Synchronous power generator accessories
- Work and assembly tables accessories
- Workshop presses accessories
-
Woodworking
- Bandsaws
- Circular saw / Sliding table saws
- Chop saws / Scroll saws
- Lathes
- Grinding machines for wood
- Edge banding machines
- Drilling machines
- Slot mortising machines
- Planers
- Firewood technology
- Gluing press
- Special wood saws
- Moulders
- CNC machines
- Multiple combinations
- Saw milling machine combinations
- Extractors and dust collectors
- Feeders
- Workshop Equipment
-
Accessories
- 2-speed engine LIBRA 35
- ABRLT-HBS740RS3
- ANBRLT-HBS940RS3
- ANBRLT-HBS940RS3MH
- Additional rip fence
- Additional rip fence on the trolley
- Adjustable start/stop buttons
- Ammeter for measuring the current consumption of the motors
- Angle stop adjustable ± 45°, with scale in the tab
- Automatic carpet centering LIBRA 10
- Automatic carpet centering LIBRA 35
- Automatic feed belt centering
- Automatic star-delta start - versions 4 and 5
- Automatic table positioning with LIBRA 10 button
- Automatic table positioning with button LIBRA 35
- Automatic table positioning with microswitch LIBRA 10
- Brush unit with Tinex brush roller LIBRA 45/3
- Buffing
- Central lubrication FBS
- Central lubrication FBS G
- Ceramic lamp with infrared rays
- Continuous carpet feed with geared motor 1.5 kW LIBRA 45/3
- Continuous carpet feed with inverter 1.5 kW (2 HP) LIBRA 45/3
- Cross section stop with 2 LCD displays for stops
- Crosscut stop of large dimensions with LCD
- Cutting height 45° 500 mm FBS G
- Cutting width with rip fence
- Device for heating the plate edge
- Diamond milling cutter pair for flush milling unit
- Digital display
- Digital position indicator for working height for a brush unit
- Drilling
- Eccentric clamp FBS
- Eccentric clamp FBS G
- Eccentric tensioner
- Eco System Package FLEXA 27
- Edge banding
- Electrical preparation Flexa 27
- Electromagnetic brake for universal spindle
- Electronic control FOX 500 KTR
- Electronic control MEGA 150 TS
- Electronic position indicator on rip fence
- Electronic thickness table positioning
- Electronic thickness table positioning PFS 520
- Electronically positionable rip fence
- Engine 1. 2-speed unit 11 kW (15 HP) LIBRA 45/3
- Engine 1. 2-speed unit 15 kW (20 HP) LIBRA 45/3
- Engine 2. 2-speed unit 11 kW (15 HP) LIBRA 45/3
- Engine 2. 2-speed unit 15 kW (20 HP) LIBRA 45/3
- Engine 2./3. 2 speed unit 15 kW (20 HP) LIBRA 45/3
- Engine 2./3. 2-speed unit 11 kW (15HP) LIBRA 45/3
- Engine 2nd engine 15 kW (20 hp) LIBRA 45/3
- Engine 2nd unit 18.5 kW (25 hp) LIBRA 45/3
- Engine 3rd engine 15 kW (20 hp) LIBRA 45/3
- Engine 3rd unit 11 kW (15 hp) LIBRA 45/3
- Engine 3rd unit 18.5 kW (25 hp) LIBRA 45/3
- Engine performance, increased for FBS
- Engine performance, increased for FBS G
- Engine performance, increased for HBS 740 RS3
- Engine power 3. 2-speed unit 11 kW (15 hp) LIBRA 45/3
- Engine power 3. 2-speed unit 15 kW (20 HP) LIBRA 45/3
- Engine power, increased for HBS 540 AS
- Engine, performance increased for HBS 940 RS3
- Engine, performance increased for HBS 940 RS3 Manual / Hydraulic
- Feed roller after the upper horizontal spindle
- Feed roller rubber, Ø140 x 25 mm
- Feed roller, toothed steel, Ø140 x 25 mm
- Feed table length 2500 mm
- Feed unit Tandem for universal spindle
- Feed units for band saws
- Feeder rollers with rubber coating
- Feeders
- Firewood processing
- First feed roller rubber-coated
- First feed roller steel, segmented
- Fixed Satinieraggregat in the outlet LIBRA 45/3
- Fixed cleaning unit in the outlet
- Fixed cleaning unit in the outlet LIBRA 45/3
- Flange feed roller rubber, Ø140 x 25 mm
- Flange feed roller steel, Ø140 x 25 mm
- Floating pressure shoe in 1st position LIBRA 45/3
- Floating pressure shoe in 4th position LIBRA 45/3
- Floating pressure shoe in the 1st position LIBRA 45
- Floating pressure shoe in the 2nd position LIBRA 45
- Floating pressure shoe in the 2nd position LIBRA 45/3
- Floating pressure shoe in the 3rd position LIBRA 45/3
- Flush trimming unit with multi-radius tool device
- Flush-trimming unit with saw and function corner rounds
- Format sliding table with length compensation device
- Glue container for EVA gluing, instead of the standard glue container
- Glue container for polyurethane glue with rapid drainage
- Gluing presses
- Grooved rubber rollers 2. Position LIBRA 45/3
- Grooved rubber rollers 3. Position LIBRA 45/3
- Grooved rubber rollers 4. Position LIBRA 45/3
- Grooving unit groove width 4 mm
- Guides
- Hydraulic belt tension systems HBS RS3
- Hydraulic belt tensioner
- Infeed table extension
- Infinite carpet feed with gear motor 2.2 kW (3 hp) LIBRA 45/3
- Infinite carpet feed with inverter 0.75 kW (1 hp) LIBRA 35
- Infinite carpet feed with inverter 2.2 kW (3 HP) LIBRA 45/3
- Infinite regulation of the feed rate 3-12 m/min
- Infinitely variable speed
- Infinitely variable speed FBS
- Infrared ceramic lamp for panel heating
- Interior lighting of the machine
- Inverter for engine 2nd unit 11 kW LIBRA 45/3
- Inverter for speed control from 2350-5200 rpm
- Inverter for speed control from 2700-6000 rpm
- Inverter with engine 3rd unit 11 kW (15 hp) LIBRA 45/3
- Inverter with motor 2./3. Power unit 11 kW (15 hp) LIBRA 45/3
- Inverter with motor 2./3. Power unit 15 kW (20 hp) LIBRA 45/3
- Inverter with motor 2nd unit 15 kW (20 hp) LIBRA 45/3
- Inverter with motor 3rd unit 15 kW (20 hp) LIBRA 45/3
- Journal cutter C 30
- Kit edge finishing with mist spray liquid
- Kit for "nesting" editing
- Kit for min. Working width 25 to 15 mm
- Kit for profiling the upper horizontal shaft
- Kit protects sensitive edges with Mist Spray FLEXA 27
- Laser device for drilling line marking
- Longitudinal stop with three LCD displays of the stop position
- Loops
- MOL3KW-HBS600AS
- MOL4KW-HBS640AS
- MOL4KW-HBS700AS
- MOL5,5KW-HBS740AS
- MOL5,5KW-HBS840AS
- MOL7,35KW-HBS800AS
- MOL9,19KW-HBS940AS
- Machining set 6 x 60 mm FLEXA 27
- Manual stop
- Material stop, pneumatically controlled
- Mechanical preparation for DADO / grooves
- Milling
- Milling cutter with guard hood
- Miter fence 1250 mm, with length compensation
- Miter fence 1500 mm
- Miter fence 1500 mm, with length compensation
- Motor 7.0 kW, 50 Hz (S6-40%) with star-delta starting
- Motor 9.0 kW, 50 Hz (S6-40%) with star-delta starting
- Motor power
- Motor power 2 x 7 kW
- Motor power 3 x 7 kW
- Motor power 7.0 kW
- Motor power 7.0 kW with star-delta starting
- Motor power 9.0 kW
- Motorised sliding carriages FBS 640 G
- Motorised sliding carriages FBS 740 G
- Motorized height adjustment and swiveling for sawing and milling unit
- Motorized rip fence with electronic positioning (1 axis)
- Multiple combinations
- Nesting sensing roller for the flush milling unit
- Nylon brush instead of grinding brush
- On-off switch Main and scoring saw blade on the sliding carriage
- Optional roller stops
- Oscillating belt blower for 1st unit LIBRA 35
- Oscillating belt blower for 1st unit LIBRA 45/3
- Oscillating belt blower for 2nd unit LIBRA 35
- Oscillating belt blower for 2nd unit LIBRA 45/3
- Oscillating belt cleaning device for 3rd unit LIBRA 45/3
- Oscillating blowing device Sanding belt LIBRA 35
- Oscillation for a brush unit, on / off switchable
- Outfeed table extension
- Pivoting control panel
- Planer shaft aggregate for LIBRA 45 110 RR and RTC
- Planing
- Planing shaft protection device with automatic height adjustment TX Matic
- Pneumatic adjustment of the 1st pressure shoe LIBRA 45/3
- Pneumatic clamping swiveling
- Pneumatic clamping swiveling drill head
- Pneumatic contact pressure for feed rollers
- Pneumatic presser
- Pneumatic pressure adjustment
- Polishing unit
- Pre-cutting device with saw blade 80 mm
- Pre-cutting device with separate motor, saw blade 100 mm
- Preparation for DADO set for si 400es
- Preparation for saw blade 550 mm
- Pressure shoes front and rear
- Quick change system glue container
- Quick change system glue container GP-200
- Quick-change spindle
- Reinforced engine 1. Aggregate 15 kW (20 hp) LIBRA 45/3
- Reinforced engine 1. Power unit 18.5 kW (25 hp) LIBRA 45/3
- Reinforced engine 11 kW (15 hp) LIBRA 10
- Reinforced engine 15 kW (20 hp)
- Reinforced engine 2./3. Power unit 15 kW (20 hp) LIBRA 45/3
- Reinforced engine 2./3. Power unit 18.5 kW (25 hp) LIBRA 45/3
- Reinforced engine LIBRA 35
- Reinforced motor 7.5 kW for universal spindle
- Reinforced vertical spindle motors and upper horizontal spindle
- Release agent sprayer
- Removal roller conveyor 2 m, left of machine
- Replacement glue container for EVA gluing with quick drain
- Reverse version of the operator side HBS 740 RS3
- Reverse version of the operator side HBS 940 RS3
- Reverse version of the operator side HBS 940 RS3 (Manual / Hydraulic)
- Reverse version of the operator side UAB-HBS540AS
- Reverse version of the operator side UAB-HBS640AS
- Reverse version of the operator side UAB-HBS740AS
- Reverse version of the operator side UAB-HBS840AS
- Reverse version of the operator side UAB-HBS940AS
- Roller conveyor 1 m, to the left of the saw blade
- Roller conveyor 1 m, to the right of the saw blade
- Roller table at infeed and outfeed for long workpieces LIBRA 45/3
- Roller table at the inlet and outlet for long or short LIBRA 45/3
- Roller table at the inlet and outlet for long workpieces
- Rubber extraction roller
- Rubber extraction roller for thickness
- Rubber extraction roller thickness
- Rubberized roller
- SSTTIHKZST-HBS940RS3MH
- Sawing
- Scraper unit with multi-radius tool device
- Second flange feed roller unit
- Second, diagonally grooved steel roller LIBRA 65/2
- Semi-hard flat sanding shoe LIBRA 10
- Semi-hard flat sanding shoe LIBRA 35
- Set of planing heads and jointing cutters
- Set with additional flange feed rollers
- Side brush unit - horizontally and vertically adjustable
- Sliding carriage 2250 mm and trimming frame
- Slot drilling equipment
- Solid wood edge magazine
- Spiral blade shaft
- Steel linkage roller at 1st position
- Steel links feed roller
- Stepless speed control
- Stepless speed control for a brush unit
- Stop opening
- Strengthened motors for dressing spindle, vertical / horizontal spindles
- Strengthened motors for dressing spindle, vertical / horizontal spindles Matrix 230
- Strip edge magazine
- Suction
- Support for feed unit with vertical and horizontal drive
- Support for feeder
- Suspensions
- Switching the roller on and off from the control panel LIBRA 10
- Switching the sanding shoe on and off from the LIBRA 10 control panel
- Swivel arm for feed unit
- TINVRZST
- TINVRZST-HBS700AS
- TINVRZST-HBS740AS
- TINVRZST-HBS800AS
- TINVRZST-HBS840AS
- Table extension front and rear with 2 inlet and outlet rollers LIBRA 10
- Table milling machine options
- Tenoning device C 26
- Thick table with two table rollers without drive PFS 520
- Thick table with two table rollers without drive PS 520
- Thick table with two table rollers without drive PS 630
- Third feed roller above powered PS 630
- Third feed roller, driven
- Third upper feed roller powered
- Tilting the table via hand crank and rack
- Tool
- Tool clamping with collet chuck
- Tool kit radius 1.5 mm
- Toolkit radius 3 mm for me 28t RC
- Trimming frames and trimming frame accessories
- Two grooved rubber rollers first position LIBRA 45/3
- Two grooved rubber rollers second position LIBRA 45/3
- Two grooved rubber rollers third Position LIBRA 45/3
- Two rollers in the thicknessing table without drive PS 52
- Two rollers in the thicknessing table without drive PS 63
- Two rollers in the thicknessing table without drive S 52 elite s
- Two saw blade speeds
- Unit for saw-cut look
- Universal spindle unit
- Upper saw blade guide made of bronze for HBS RS
- Vacuum pump 4 kW
- Vacuum table with electric fan 4 kW (5.5 HP) LIBRA 45/3
- Version "X" for RT LIBRA 65/2
- Version "X" for RTC LIBRA 65/2
- Version "X" for TT LIBRA 65/2
- Version "Y" for RT LIBRA 65/2
- Version "Y" for RTC LIBRA 45
- Version "Y" for TC LIBRA 45
- Version "Y" for TT LIBRA 65/2
- Version "Z Super" for RTC 135 LIBRA 45
- Version "Z" for RTC 110 LIBRA 45
- Version "Z" for RTC 135 LIBRA 45
- Version "Z" for RTC LIBRA 65/2
- Version "Z" for TC 135 LIBRA 45
- Version X for LIBRA 35 RTC 95 - RTC 110
- Version X for LIBRA 35 TC 110
- Version Y for LIBRA 35 RTC 95 - RTC 110
- Version Y for LIBRA 35 TC 110
- Version Z for LIBRA 35 RTC 110
- Version Z for LIBRA 35 TC 110
- Vertical pressure roller in front of the left vertical spindle
- Woodturning
- Work table with Rexilon insert
- Workpiece cleaning unit in the outlet LIBRA 45/3
- Workpiece support with roller 1400 mm
- Workshop equipment
- vacuum table
-
Welding
- MIG/MAG welding machines
- TIG welding machines
- Laser welding devices
- Multifunction inverter
- Electrode Inverter
- Plasma cutting machine
- Electrochemical metalworking
- Worker protection
-
Accessories
- Accessories
- Adaptor welding torch
- Dust collection bag set of 5
- Exhaust hood with lighting
- Funnel nozzle
- Funnel nozzle round
- Pre-filter insert Aluminum mesh
- Protective grille for extraction hood
- Slit nozzle 300 mm with magnetic base
- Slot nozzle 600 mm with magnetic base
- Start / stop system
- Trolley to SRF Mini
-
Welding accessories
- Air filter
- Assembly and welding tables and accessories
- Connections
- Controls
- Cooling devices
- Interfaces
- MIG / MAG welding torch sets
- Miscellaneous
- Oxyfuel technology
- Soft soldering - heating and brazing
- Transport and storage aids
- Welding accessories
- Welding and welding equipment accessories
- Welding and welding equipment accessories in shop packaging
- Wire feed
-
Cleaning
- Vacuum cleaners
- Sweeping / vacuum sweepers
- Steam cleaner / steam vacuum cleaner
- High pressure cleaner
- Scrubbers / Scrubber dryers
- Water pumps
- Water hose reels
-
Accessories
- High pressure cleaner accessories
- Pressure sprayers accessories
- Scrubber / scrubber drier accessories
- Side brush PP 330 / 0.3 mm
- Steam cleaner / steam vacuum cleaner accessories
- Sweeper / Sweeper accessories
- Technical chemicals
- Vacuum cleaners accessories
- Water hose reels accessories
- Water pump accessories
-
Air
- Piston compressors
- Screw compressors
-
Pneumatic Tools
- Blowguns
- Body tool
- Cartridge and silicone doll pistols
- Compressed air sets
- Cutting and cutting tools
- Die Grinder
- Drilling machines
- Free-standing meter
- Grease gun sets
- Grinders
- Hammers
- Impact wrench
- Needle scalers
- Needle scalers accessories
- Paint and spray guns
- Pneumatic Tools
- Ratchets
- Riveter
- Sandblasting
- Saw
- Saw accessories
- Screwdrivers
- Soda Blaster
- Spray and special pistols
- Staplers and nailers
- Tire valve plug
- Tyre inflation measuring devices
- Compressed air treatment
- Compressed air systems components
- Compressed air and energy distribution
- Accessories
- Parts Enquiry
- Catalogues
Show
Categories
Filters
CNC Milling Machines
- Vertical spindle speed range 10 - 18000 min¯¹
- Net weight 8000 kg
- Coolant pump(s) drive power 0,55 kW
- Cooling lubricant system tank capacity 500 l
- Fast motion speed X axis 48000 mm/min
- Net weight 1423 kg
- Coolant pump(s) drive power 0,45 kW
- Cooling lubricant system tank capacity 70 l
- Feed motor torque X axis continuous operation S1 3,5 Nm
- Feed motor torque Y axis continuous operation S1 6 Nm
- Net weight 16000 kg
- Coolant pump(s) drive power 1 kW
- Cooling lubricant system flow rate 70 l/min
- Cooling lubricant system tank capacity 980 l
- Fast motion speed X axis 24000 mm/min
- Net weight 10000 kg
- Coolant pump(s) drive power 1 kW
- Cooling lubricant system tank capacity 460 l
- Fast motion speed X axis 24000 mm/min
- Fast motion speed Y axis 24000 mm/min
- Net weight 6500 kg
- Coolant pump(s) drive power 1 kW
- Cooling lubricant system flow rate 35 l/min
- Cooling lubricant system tank capacity 260 l
- Fast motion speed X axis 36000 mm/min
- Net weight 5500 kg
- Coolant pump(s) drive power 1 kW
- Cooling lubricant system flow rate 35 l/min
- Cooling lubricant system tank capacity 200 l
- Fast motion speed X axis 48000 mm/min
- Net weight 4300 kg
- Coolant pump(s) drive power 0.9 kW
- Cooling lubricant system flow rate 35 l/min
- Cooling lubricant system tank capacity 116 l
- Fast motion speed X axis 48000 mm/min
- Coolant pump(s) drive power 1.35 kW
- Distance between columns 3600 mm
- Fast motion speed X axis 10000 mm/min
- Fast motion speed Y axis 15000 mm/min
- Fast motion speed Z axis 10000 mm/min
- Coolant pump(s) drive power 1.35 kW
- Distance between columns 2400 mm
- Fast motion speed X axis 15000 mm/min
- Fast motion speed Y axis 15000 mm/min
- Fast motion speed Z axis 10000 mm/min
- Net weight 26000 kg
- Coolant pump(s) drive power 1.35 kW
- Distance between columns 1650 mm
- Fast motion speed X axis 16000 mm/min
- Fast motion speed Y axis 10000 mm/min
- Net weight 22500 kg
- Coolant pump(s) drive power 1.35 kW
- Distance between columns 1400 mm
- Fast motion speed X axis 10000 mm/min
- Fast motion speed Y axis 10000 mm/min
- Net weight 9150 kg
- Acceleration X, Y, Z axis 7 m/s²
- Cooling lubricant system tank capacity 380 l
- Fast motion speed X axis 36000 mm/min
- Fast motion speed Y axis 36000 mm/min
- Net weight 4350 kg
- CNC memory 8 MB
- Control type Sinumerik 828D
- Coolant pump(s) drive power each 1.27 kW
- Cooling lubricant system flow rate 66 – 100 l/min
- Vertical spindle speed range 10 - 10000 min¯¹
- Net weight 4500 kg
- Coolant pump(s) drive power 0.37 kW
- Cooling lubricant system tank capacity 190 l
- Fast motion speed X axis 20000 mm/min
- Net weight 3800 kg
- Acceleration X, Y, Z axis 2 m/s²
- CNC memory 8 MB
- Control type Sinumerik 828D
- Coolant pump(s) drive power 370 W
- Vertical spindle speed range 10 - 10000 min¯¹
- Net weight 2800 kg
- Coolant pump(s) drive power 650 W
- Cooling lubricant system tank capacity 120 l
- Fast motion speed X axis 15000 mm/min
- Vertical spindle speed range 50 - 10000 min¯¹
- Net weight 2300 kg
- Coolant pump(s) drive power 450 W
- Cooling lubricant system tank capacity 80 l
- Explanation vertical spindle speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation.
- Vertical spindle speed range 50 - 10000 min¯¹
- Net weight 1900 kg
- Coolant pump(s) drive power 650 W
- Cooling lubricant system tank capacity 70 l
- Explanation vertical spindle speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation.
- Net weight 720 kg
- Coolant pump(s) drive power 95 W
- Cooling lubricant system tank capacity 50 l
- Explanation vertical spindle speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation.
- Feed motor torque X axis continuous operation S1 3,5 Nm
€27.859,50 EUR
CNC Milling Machines for Sale in Ireland
CNC milling is a computer-controlled machining process in which rotating cutting tools remove material from a fixed workpiece. It delivers high accuracy, speed and repeatability, making CNC milling machines suitable for both one-off precision components and medium- or high-volume production.
Precision CNC Machining Centres
Our CNC milling machines for sale in Ireland are designed for producing complex shapes, slots, pockets, surfaces and detailed engineering components. Also known as CNC machining centres, these machines help manufacturers improve consistency, reduce manual work and complete demanding machining operations efficiently.
Vertical and Horizontal CNC Milling Machines
Vertical CNC milling machines are commonly used for general machining, toolmaking and precision engineering. Horizontal CNC machining centres are often selected for heavier-duty production, larger components and applications where faster material removal and higher output are required.
Advanced CNC Milling Technology
Modern CNC machining centres may include automatic tool changers, multi-axis machining, pallet changers, advanced control systems and integrated cooling. These features reduce setup time, improve productivity and allow multiple machining operations to be completed in a single setup.
CNC Milling Machine Supply and Support in Ireland
Choosing the right CNC milling machine involves more than comparing technical specifications. Warranty, safety certification, delivery, installation, maintenance and access to spare parts all contribute to long-term value. If you need help choosing the right CNC machining centre, contact Millennium Machinery for expert advice based on your materials, components, production requirements and budget.
Recently viewed products
Product title
Vendor
€19,99 EUR | €24,99 EUR
Product title
Vendor
€19,99 EUR | €24,99 EUR
Product title
Vendor
€19,99 EUR | €24,99 EUR
Product title
Vendor
€19,99 EUR | €24,99 EUR
Product title
Vendor