FSM – precision surface grinding machines with NC-controlled vertical feed
Automatic feed control AD 5
The FSM series models are equipped with automatic feed control (AD 5). Different grinding cycles are available: surface loops with delivery at the starting point, groove loops with delivery at the starting point, groove loops with delivery at the start and end points. The delivery of the grinding wheel can be individually designed depending on the workpiece. The total grinding size is divided into coarse and fine delivery, the delivery steps can be freely entered, depending on the application, with a minimum resolution of up to 0.001mm. The possibility to program dead runs after a certain number of delivery steps as well as passages for firing after reaching the grinding measure provides the best grinding results.
Size of the clamping plate | 150 x 450 mm |
Max. Distance between spindle and table | 450 mm |
Traversing speed of the table | 5 – 25 m / min |
Max. Workpiece weight | 110 kg |
Spindle speed | 2900 min-1 |
Size of the grinding wheel | 180 x 13 x 31.7 mm |
Motor power spindle | 1.5 kW |
Engine power hydraulic pump | 0.75 kW |
Electrical connection | 400 V / 50 Hz |
Dimensions (L x W x H) | 1900 x 1300 x 1700 mm |
mass | 900 kg |