175 Tonne Ironworker - HPS 175 Dual Station
Description
- Combined hydro. Section steel shears/punching with up to 5 processing stations and foot control
- Punching station, flat steel shears, angle steel shears, sectional steel shears, from HPS 45S with notching station
- DS series with two working cylinders and two-foot pedals for simultaneous use with punching station and sectional steel shears
- Stepless adjustment of the stroke
- larger reach for punching station with 620mm optional, available from HPS 55DS
- heavy and stable welded construction
- from HPS 45S as standard with notching knife
- With a powerful 400Volt engine
- V-notching knife, oversized punching device, and larger punching station punching available on request
- Two-stage foot pedal for inching operation
- Standard with MUBEA-holder for stamp no. 1, no. 2, and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional
Advantages of punching over drilling:
- high time savings – cycle times
- no chips
- no cooling
Note:
- All hydraulic sectional shears are delivered with oil.

Technical Specifications
Ø in max. Sheet thickness ** |
|
Throat |
625 mm |
stroke |
80 mm |
Stroke/min. |
22 |
Working height punch |
1130 mm |
Steel Bar shears Round/square |
65mm / 50mm |
90 ° cut in mm |
200 x 200 x 15 |
45 ° cut in mm |
80×10 |
working height |
1130 mm |
Material thickness max. |
380 x 30 mm |
Material size max. |
600 x 20 mm |
knife length |
610 mm |
angle cut |
120 x 15 mm |
working height |
810 mm |
Material thickness max. |
16 mm |
width |
60 mm |
depth |
100 mm |
UI profile knife |
300×125 |
T-profile knives |
150 x 15 mm |
Special V-notching tools |
100 x 100 x 16 mm |
Motor power 50 Hz |
11 kW |
Net Weight |
6000 kg |
pressure |
175 to. |
Dimensions in mm |
2730 x 1150 x 2280 |