55 Tonne Ironworker - HPS 55 Dual Station
Description
- Combined hydro. Section steel shears/punching with up to 5 processing stations and foot control
- Punching station, flat steel shears, angle steel shears, sectional steel shears, from HPS 45S with notching station
- DS series with two working cylinders and two-foot pedals for simultaneous use with punching station and sectional steel shears
- Stepless adjustment of the stroke
- larger reach for punching station with 620mm optional, available from HPS 55DS
- heavy and stable welded construction
- from HPS 45S as standard with notching knife
- With a powerful 400Volt engine
- V-notching knife, oversized punching device, and larger punching station punching available on request
- Two-stage foot pedal for inching operation
- Standard with MUBEA-holder for stamp no. 1, no. 2, and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional
Advantages of punching over drilling:
- high time savings – cycle times
- no chips
- no cooling
Note:
- All hydraulic sectional shears are delivered with oil.

Technical Specifications
Ø in max. Sheet thickness ** |
|
Throat |
255 mm |
stroke |
60 mm |
Stroke/min. |
25 |
Working height punch |
1030 mm |
Steel bar shears Round/square |
40mm / 40mm |
90 ° cut in mm |
120 x 120 x 12 mm |
45 ° cut in mm |
70 x 10 mm |
working height |
1130 mm |
Flat Steel Shears Material thickness max. |
200 x 20 mm |
Flat Steel Shears Material size max. |
300 x 15 mm |
knife length |
317 mm |
angle cut |
80 x 15 mm |
working height |
900 mm |
Material thickness max. |
10 mm |
width |
45 mm |
depth |
90 mm |
UI profile knife |
120 x 58 mm |
T-profile knives |
80 x 9 mm |
Special V-notching tools |
100 x 100 x 10 mm |
Motor power 50 Hz |
5.5 kW |
Net Weight |
1520 kg |
pressure |
75 to. |
Dimensions in mm |
1500x950x1880 |