85 Tonne Ironworker - HPS 85 Dual Station
Description
- Combined hydro. Section steel shears/punching with up to 5 processing stations and foot control
- Punching station, flat steel shears, angle steel shears, sectional steel shears, from HPS 45S with notching station
- DS series with two working cylinders and two-foot pedals for simultaneous use with punching station and sectional steel shears
- Stepless adjustment of the stroke
- larger reach for punching station with 620mm optional, available from HPS 55DS
- heavy and stable welded construction
- from HPS 45S as standard with notching knife
- With a powerful 400Volt engine
- V-notching knife, oversized punching device, and larger punching station punching available on request
- Two-stage foot pedal for inching operation
- Standard with MUBEA-holder for stamp no. 1, no. 2, and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional
Advantages of punching over drilling:
- high time savings – cycle times
- no chips
- no cooling
Note:
- All hydraulic sectional shears are delivered with oil.
Technical Specifications
| Ø in max. Sheet thickness ** | |
| Throat | 355 mm |
| stroke | 80 mm |
| Stroke/min. | 25 |
| Working height punch | 1080 mm |
| Steel Bar shears Round/square | 50mm / 50mm |
| 90 ° cut in mm | 150 x 150 x 15 |
| 45 ° cut in mm | 80×8 |
| working height | 1200 mm |
| Material thickness max. | 380 x 20 mm |
| Material size max. | 480 x 15 mm |
| knife length | 482 mm |
| angle cut | 120 x 15 mm |
| working height | 940 mm |
| Material thickness max. | 13 mm |
| width | 52 mm |
| depth | 100 mm |
| UI profile knife | 160 x 74 mm |
| T-profile knives | 100 x 11 mm |
| Special V-notching tools | 100 x 100 x 13 mm |
| Motor power 50 Hz | 7.5 kW |
| Net Weight | 2315 kg |
| pressure | 85 to. |
| Dimensions in mm | 1920x950x2040 |