My Cart

Close
Next Day Delivery on all ROI Orders

Need Advice? Ask Our Team

  • Large selection
  • Accessories in stock
  • Next Day Delivery
  • Huge Product Knowledge

Motorised Section Rolls - Metallkraft PRM 31 F (400v)

Enquire

Motorised Ring Bending Machine

DESCRIPTION
  •  heavy welded steel construction
  •  horizontal and vertical work possibility
  •  lower rollers directly, driven by a motor
  •  Rolls are hardened
  •  Shafts made of special steel, hardened and ground
  •  Delivery via upper roller
  •  lateral straightening rollers, infinitely adjustable
  •  2 driven rollers
  •  powerful 400 V engine
  •  Left / right rotation by foot pedal
    • Read More

Motorised Ring Bending Machine

DESCRIPTION
  •  heavy welded steel construction
  •  horizontal and vertical work possibility
  •  lower rollers directly, driven by a motor
  •  Rolls are hardened
  •  Shafts made of special steel, hardened and ground
  •  Delivery via upper roller
  •  lateral straightening rollers, infinitely adjustable
  •  2 driven rollers
  •  powerful 400 V engine
  •  Left / right rotation by foot pedal
  •  Mobile control panel with foot control

Optional accessories
  •  Tube bending rolls
  •  Angle bending rolls
  •  Special straightening rollers
  •  Profile bending rolls
  •  Plastic rollers for soft materials
  •  Device for twisting rods
  •  Spiral bending tool
Read more

Technical Data

Dimensions and weights

  • Length (product) approx. - 600mm
  • Width/depth (product) approx. - 800mm
  • Height (product) approx. - 1450mm
  • Net weight approx. - 220kg

Bending performances profile type standard

  • Square material dimensions (yield point 24 kg/mm²) [1] - 30mm
  • Square material min. bending Ø (yield point 24 kg/mm²) [1] -
    900mm
  • Square material dimensions (yield point 24 kg/mm²) [2] - 10mm
  • Square material min. bending Ø (yield point 24 kg/mm²) [2] -
    200mm
  • Flat material light axis dimensions bending Ø (yield point
    24 kg/mm²) [1] - 80 x 15mm
  • Flat material light axis min. bending Ø (yield point 24
    kg/mm²) [1] - 700mm
  • Flat material light axis dimensions bending Ø (yield point
    24 kg/mm²) [2] - 30 x 6mm
  • Flat material light axis min. bending Ø (yield point 24
    kg/mm²) [2] - 400mm
  • Flat material heavy axis dimensions bending Ø (yield point
    24 kg/mm²) [1] - 50 x 10mm
  • Flat material heavy axis min. bending Ø (yield point 24
    kg/mm²) [1] - 800mm
  • Flat material heavy axis dimensions bending Ø (yield point
    24 kg/mm²) [2] - 20 x 6mm
  • Flat material heavy axis min. bending Ø (yield point 24
    kg/mm²) [2] - 300mm
  • UPN profile top rib dimensions (yield point 24 kg/mm²) [1] -
    50 x 6mm
  • T profile top rib min. bending Ø (yield point 24 kg/mm²) [1]
    - 600mm
  • UPN profile top rib dimensions (yield point 24 kg/mm²) [2] -
    20 x 3mm
  • T profile top rib min. bending Ø (yield point 24 kg/mm²) [2]
    - 400mm
  • Explanation for T profile rib above - Additional spacers may
    be required
  • UPN profile outside rib dimensions (yield point 24 kg/mm²)
    [1] - 50 x 6mm
  • T profile outside rib min. bending Ø (yield point 24 kg/mm²)
    [1] - 600mm
  • UPN profile outside rib dimensions (yield point 24 kg/mm²)
    [2] - 20 x 3mm
  • T profile outside rib min. bending Ø (yield point 24 kg/mm²)
    [2] - 400mm
  • UPN profile inside rib dimensions (yield point 24 kg/mm²)
    [1] - 50 x 6mm
  • T profile inside rib min. bending Ø (yield point 24 kg/mm²)
    [1] - 600mm
  • UPN profile inside rib dimensions (yield point 24 kg/mm²)
    [2] - 20 x 3mm
  • T profile inside rib min. bending Ø (yield point 24 kg/mm²)
    [2] - 400mm
  • UPN profile outside leg dimensions (yield point 24 kg/mm²)
    [1] - U50x25mm
  • UPN profile outside leg min. bending Ø (yield point 24
    kg/mm²) [1] - 600mm
  • UPN profile outside leg dimensions (yield point 24 kg/mm²)
    [2] - U30x15mm
  • UPN profile outside leg min. bending Ø (yield point 24
    kg/mm²) [2] - 400mm
  • UPN profile inside leg dimensions (yield point 24 kg/mm²)
    [1] - U50x25mm
  • UPN profile inside leg min. bending Ø (yield point 24
    kg/mm²) [1] - 600mm
  • UPN profile inside leg dimensions (yield point 24 kg/mm²)
    [2] - U30x15mm
  • UPN profile inside leg min. bending Ø (yield point 24
    kg/mm²) [2] - 400mm
  • Explanations for bending performance, profile type standard
    - The performance data apply to material with a max. Yield strength of 24kg /
    mm². Bending power at VA: factor 0.7

Bending performances profile type optional

  • Square tube dimensions (yield point 24 kg/mm²) [1] - 40 x
    3mm
  • Square tube min. bending Ø (yield point 24 kg/mm²) [1] - 1200mm
  • Square tube dimensions (yield point 24 kg/mm²) [2] - 30 x
    2mm
  • Square tube min. bending Ø (yield point 24 kg/mm²) [2] - 800mm
  • Square tube heavy axis dimensions bending Ø (yield point 24
    kg/mm²) [1] - 50 x 30 x 3mm
  • Square tube heavy axis min. bending Ø (yield point 24
    kg/mm²) [1] - 1200mm
  • Square tube heavy axis dimensions bending Ø (yield point 24
    kg/mm²) [2] - 40 x 20 x 2mm
  • Square tube heavy axis min. bending Ø (yield point 24
    kg/mm²) [2] - 800mm
  • Round tube dimensions (yield point 24 kg/mm²) [1] - 38.1 x
    2.9mm
  • Round tube min. bending Ø (yield point 24 kg/mm²) [1] - 600mm
  • Round tube dimensions (yield point 24 kg/mm²) [2] - 6.35 x
    1.8mm
  • Round tube min. bending Ø (yield point 24 kg/mm²) [2] - 300mm
  • Round profile dimensions (yield point 24 kg/mm²) [1] - 30mm
  • Round profile min. bending Ø (yield point 24 kg/mm²) [1] - 900mm
  • Round profile dimensions (yield point 24 kg/mm²) [2] - 10mm
  • Round profile min. bending Ø (yield point 24 kg/mm²) [2] - 200mm
  • isosceles angle profile outside dimensions (yield point 24
    kg/mm²) [1] - 40 x 40 x 5mm
  • isosceles angle profile outside leg min. bending Ø (yield
    point 24 kg/mm²) [1] - 600mm
  • isosceles angle profile outside dimensions (yield point 24
    kg/mm²) [2] - 30 x 30 x 4mm
  • isosceles angle profile outside leg min. bending Ø (yield
    point 24 kg/mm²) [2] - 300mm
  • isosceles angle profile inside dimensions (yield point 24
    kg/mm²) [1] - 35 x 35 x 5mm
  • isosceles angle profile inside leg min. bending Ø (yield
    point 24 kg/mm²) [1] - 600mm
  • isosceles angle profile inside dimensions (yield point 24
    kg/mm²) [2] - 30 x 30 x 4mm
  • Explanations for bending performance, profile type optional
    - The performance data apply to material with a max. Yield strength of 24kg /
    mm². Bending power at VA: factor 0.7

Electrical Data

  • Drive motor output - 0,75kW
  • Supply voltage - 400V
  • Mains frequency - 50Hz

Machine data

  • Shaft diameter top - 30mm
  • Shaft diameter bottom - 30mm
  • Roller diameter top - 148mm
  • Roller diameter bottom - 118mm
  • Speed - 4m/min

Delivery Contents

  • Standard bending rolls
  • mobile foot pedal for left-hand rotation with emergency stop
  • straightening rollers
  • substructure

Shipping to Ireland & UK.

To see the exact shipping price for this product Add the product to cart. Then add your location and other details for the shop to calculate shipping costs to you.

Our two rates are €13.00 for shipments up to 30kg and the €60 for all shipments
over 30kg weight.

€13 is via DPD and the €60 is via pallet express.

You can also pick up an item for free from our Longford store.

All orders (stock items) for Standard delivery are normally despatched within one to two working days from clearance of payment.

We expect delivery to be within 2 to 5 working days thereafter.

Standard Delivery will be by Courier service for orders up to 30kg in weight.