Vari Speed Drill Mill - OPTImill BF 16Vario (230v)
Description
- Small drilling-milling machine with an electronically infinitely variable drive for the modeler
- Versatile application
- All guides are ground and visibly scraped (oil pockets for lubrication)
- Column laterally displaceable for extended application
- Tool holder MT2
- Safety electronics in 24 Volt version
- EMC filter class B (use in private households)
- All travel paths are readable via scales
- Inexpensive and stable in value
Room amenities
Operating unit
- Easy
- clear
- On-off switch
- potentiometer
- Emergency stop impact switch
Speed setting
- Infinitely variable from 100 to 3,000 1 / min
High concentricity
- By tapered roller bearing
- measured better than 0.015 mm in the quill
Windscreen
- adjustable height
- Large dimensions
- microswitch
Crosstable
- Solid
- T-grooves
- Coolant groove
- Adjustable end stops
Feed screw
- Game in the feed spindle adjustable and adjustable
Gear ratio
Drill-mill head
- Can be tilted by ± 90 ° on both sides
- for drilling and milling work in the angular position as required
Guides
- Clean milling pattern by individually clamped guides
Pillar
- Stable
- dovetail guide
- Can be adjusted via wedge strips on all 3 axes
Handwheels
- Accurate delivery through positionable scale rings on all handwheels
Longitudinal dimension scale
- Integrated into the crosstable
Optional Universal substructure
- Dimensions L x W x H: 420 x 340 x 800 mm
Art. 3353000
Optional chip pan
- Dimensions L x W x H: 720 x 470 x 30 mm
Art. 3352999
Technical Specifications
Electrical voltage |
230V |
Phase (s) |
1 Ph |
Current Type |
~ |
power frequency |
50 h |
Power drive motor |
500W |
Drilling capacity steel (S235JR) |
16 mm |
Continuous drilling capacity steel (S235JR) |
12 mm |
Knife head size max. |
63 mm |
End mill size max. |
20 mm |
Quill |
50 mm |
Spindle taper |
MK2 / M10 |
Throat |
170 mm |
Spindle speed |
100 – 3,000 min-1 |
gear stages |
2 levels/speed electronically adjustable |
Vertical spindle Turning area milling head Z – X plane |
+/- 90 degrees |
Crosstable (length x width) |
400 x 120 mm |
T-slot |
10 mm |
T-slots number |
3 |
T-slots clearance |
35 mm |
Spindle cross table distance |
275 mm |
Travel X-axis |
220 mm |
Travel Y-axis |
160 mm |
Traverse Z-axis |
210 mm |
Dimensions (length x width x height) |
505 x 465 x 795 mm |
mass |
62 kg |
EMC class |
C1 |