My Cart


Vari Speed Drill Mill - OPTImill MH 20V (230v)


  • Stable drilling and milling machine with an electronically infinitely variable drive.
  • Feed spindles adjustable without backlash by adjustable spindle nuts
  • Stable dovetail guide, precision ground and scraped with adjustable wedges
  • EMC filter class B (use in private households)
  • All guides are ground and visibly scraped (oil pockets for lubrication)
  • Precisely processed
  • Double-row angular contact ball bearings in the axles, adjustable without backlash
  • Safety electronics in 24 Volt version
  • Bellows as guide protection
  • Forward / reverse operation
  • Drilling and milling head inclinable by ± 90, for milling and drilling work in any angular position
  • machine lamp
  • Height-adjustable protective screen with microswitch against flying chips and parts for the utmost protection of the user
  • Easy to read speed display and depth display, switchable mm / inch
  • fine feed

Room amenities

  • control electronics
    • Integrated relay control
  • engine
    • Two-stage gear ratio for powerful transmission of engine power
    • Powerful DC motor with permanent current monitoring
  • Z-pillar and X-axis
    • Prepared groove for subsequent mounting of magnetic tapes
  • control panel
    • User-friendly membrane keyboard
    • Easy to read digital speed display
    • clear
    • Emergency stop impact switch
  • energy chain
    • Gentle cable routing
  • Tapered roller bearings
    • High concentricity ≤ 0.015 mm measured in the quill
  • pillar
    • Reversible on both sides by 30 mm
    • With swiveled head, longer travel paths, and centric machining of the workpiece possible
    • Back with hole
    • Slightly oil the trapezoidal spindle or grease off the ball screws
  • crosstable
    • Solid
    • Precise surface finish
    • With T-slots
    • Adjustable wedges
    • Adjustable via 3 handwheels
    • Adjustable end stops
  • Y-axis
    • Prepared groove for subsequent mounting of magnetic tapes

Technical Specifications

length 750 mm
Width depth 650 mm
height 820 mm
Weight (net) 94 kg
Power drive motor 750 W
Supply voltage 230V
Phase (s) 1 Ph
Current Type ~
power frequency 50 Hz
Knife head size max. 52 mm
End mill size max. 20 mm
Vertical spindle projection 170 mm
Vertical spindle Spindle mount MK 2
Vertical spindle speed range 100 – 3000 min-1
Vertical spindle Number of speed ranges 2
Vertical spindle Control of the speed control electronic
Horizontal milling length 510 mm
Horizontal milling width 180 mm
Distance vertical spindle – horizontal milling min. 255 mm
Distance vertical spindle – horizontal milling table max. 255 mm
Horizontal milling T-slots size 12 mm
Horizontal milling T-slots number 3
Horizontal milling T-slots clearance 63 mm
Horizontal milling load max. 50 kg
Traverse X-axis manually 280 mm
Travel Y-axis manually 175 mm
Travel Z-axis manually 210 mm
Drilling capacity steel (S235JR) 16 mm
Continuous drilling capacity steel (S235JR) 12 mm
Vertical spindle Turning area milling head Z – X plane 90 degrees
Vertical spindle Pinole diameter 60 mm
Vertical spindle Quill stroke 50 mm
EMC class C1
€2.115,00 incl. Vat
- +