Vari Speed Drill Mill - Optimill MH 20VL
- Precisely built
- High concentricity due to tapered roller bearings ≤ 0.015 mm measured in the quill
- Motor with two-stage gear ratio for powerful transmission of motor power
- Manual quill feed with fine feed
- Powerful DC motor with permanent current monitoring
- Safety electronics in 24 Volt version
- Control electronics with integrated relay control
- Clear control panel with user-friendly membrane keyboard
- Easy-to-read digital display for speed and drilling depth
- Solid and large dimensioned cross table, precisely finished with T-slots and adjustable wedge strips
- Adjustable end stops
- Stable dovetail guide with adjustable wedge strips
- Emergency stop impact switch
- Drilling and milling head can be tilted by ± 60°
- Fine milling feed
- Forward/reverse rotation
- Machine lamp
- Double-row angular contact ball bearings in the axes, adjustable without play
- Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user
- X, Y, and Z axes with prepared grooves for the subsequent assembly of magnetic tapes.
Dimensions and weights |
|
|
|
Length (product) approx. |
770mm
|
Height (product) approx. |
917mm
|
Width/depth (product) approx. |
714mm
|
Net weight approx. |
99kg
|
Drilling/milling output |
|
|
|
Drilling performance steel (S235JR) |
16mm
|
Max. size shaft milling cutter |
20mm
|
Max. size milling head |
52mm
|
Continuous drilling performance mild steel (S235JR) |
12mm
|
Electric Data |
|
|
|
Supply voltage |
230V
|
Current type |
AC |
Phase(s) |
1Ph
|
Mains frequency |
50Hz
|
Milling table horizontal |
|
|
|
Milling table length |
700mm
|
Milling table T-groove size |
12mm
|
Milling table width |
180mm
|
Milling table T-groove number |
3 |
Min. clearance spindle –milling table |
255mm
|
Milling table T-groove spacing |
63mm
|
Max. clearance spindle – milling table |
255mm
|
Milling table max. load-bearing capacity |
50kg
|
Standards and certifications |
|
|
|
Standard |
DIN EN 55011 |
EMC level |
C1 |
Travel |
|
|
|
Travel X-axis manual |
480mm
|
Travel Z-axis manual |
210mm
|
Travel Y-axis manual |
175mm
|
|
|
Vertical spindle |
|
|
|
Vertical spindle reach |
170mm
|
Spindle quill diameter |
60mm
|
Vertical spindle chuck |
MT 2 |
Spindle quill stroke |
50mm
|
Spindle swivel range milling cutter head Z – X plane |
60°
|
Spindle speed control |
electronically adjustable |
Vertical spindle speed range |
100 – 3000min¯¹
|
Spindle drive motor output S6-30 % operation |
0.75kW
|
Vertical spindle number of gears |
2 |